|
|
|
|
IDC Style Flat Cable Assemblies. 26 Position .100" Centerline Socket Connector to 25 Position IDC D-Subminiature Connector, Female (socket), 36" long. Fully tested, assembled to order.
Cable Assembly Part Number Builder:
ECA - A ## B @@ - LL - O - QQQ
ECA= Express Cable Assembly
A= Connector A Type (replace A with:) S= Socket E= Card Edge D= D Subminiature (add M for male, F for female) DIP= DIP Package C= Centronics H= Header
## = Connector A Size
B= Connector B Type (replace B with:) S= Socket E= Card Edge D= D Subminiature (add M for male, F for female) DIP= DIP Package C= Centronics
@@= Connector B Size
LL= Cable length (in inches)
O= Connector orientation (replace O with:) A= Pin 1, both facing out B= Pin 1, both facing in C= Pin 1 outside/inside (connectors facing same direction)
QQQ= Quantity
Example: ECA-26S25DM-24-A-005 26 position socket connector to 25 position D-Sub male, 24 inches long, pin 1 facing out both ends, 5 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Part Number: ECA-S26D25F-36-A-010
- Assembled length: 36" outside connectors (+/-1/4")
- Connectors: 26 position IDC socket connector, P/N 15-026SP. Center polarizing bump, military style polarizing grooves, supplied with strain relief. Phosphor bronze contacts, UL94V-0 Material.
- 25 position IDC D-subminiature female (socket) connector, P/N 15-D25FT. Supplied with strain relief. Phosphor bronze contacts, UL94V-0 Material.
- Cable: Industry standard .050" centerline flat ribbon cable, UL2651 style VW-1, 300 Volt, 105 deg C. P/N 97-025
- Mates with .100" centerline headers
- Connector orientation: Pin 1 outside (polarizing keys facing out)
- Gray flat cable.
- Gold flash over nickel plating at contact point
- Fully tested
- Assembled to order
|
|
|
|
|
|
|