 |
 |
 |
|
IDC Style Flat Cable Assemblies, .100" Centerline 600mil DIP Package Connectors, 28 Position, 10" long. Fully tested, assembled to order.
Version C: Pin 1 located outside / inside (connectors facing same direction)
Cable Assembly Part Number Builder:
ECA - A ## B @@ - LL - O - QQQ
ECA= Express Cable Assembly
A= Connector A Type (replace A with:)
S= Socket
E= Card Edge
D= D Subminiature (add M for male, F for female)
DIP= DIP Package
C= Centronics
## = Connector A Size
B= Connector B Type (replace B with:)
S= Socket
E= Card Edge
D= D Subminiature (add M for male, F for female)
DIP= DIP Package
C= Centronics
@@= Connector B Size
LL= Cable length (in inches)
O= Connector orientation (replace O with:)
A= Pin 1, both facing out
B= Pin 1, both facing in
C= Pin 1 outside/inside (connectors facing same direction)
QQQ= Quantity
Example: ECA-26S25DM-24-A-005
26 position socket connector to 25 position D-Sub male, 24 inches long, pin 1 facing out both ends, 5 pieces.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Part Number: ECA-DIP28DIP28-10-C-003 Assembled length: 10" outside connectors (+/-1/4")
- Connectors: 28 position .600" DIP plug connectors (2), P/N 15-D28. Phosphor bronze contacts, UL94V-0 Material. Plugs into .600" wide IC socket or can be soldered directly to printed circuit board.
- Cable: Industry standard .050" centerline flat ribbon cable, UL2651 style VW-1, 300 Volt, 105 deg C. P/N 97-028
- Mates with .300" x .100" IC sockets
- Connector orientation: Pin 1 outside
- Color: Connectors-Black, Cable-Gray
- Gold flash over nickel plating at contact point
- Fully tested
- Assembled to order
|
|
|
|
|
|
|