|
|
|
|
IDC Style Flat Cable Assemblies, .100" Centerline 300mil DIP Package Connectors, 14 Position, 18" long. Fully tested, assembled to order. Please choose connector orientation form the drop down menu (replaces "O" in the part number): Version A: Pin 1 on both connectors facing out (Default style) Version B: Pin 1 on both connectors facing in Version C: Pin 1 located outside / inside (connectors facing same direction)
Cable Assembly Part Number Builder:
ECA - A ## B @@ - LL - O - QQQ
ECA= Express Cable Assembly
A= Connector A Type (replace A with:) S= Socket E= Card Edge D= D Subminiature (add M for male, F for female) DIP= DIP Package C= Centronics
## = Connector A Size
B= Connector B Type (replace B with:) S= Socket E= Card Edge D= D Subminiature (add M for male, F for female) DIP= DIP Package C= Centronics
@@= Connector B Size
LL= Cable length (in inches)
O= Connector orientation (replace O with:) A= Pin 1, both facing out B= Pin 1, both facing in C= Pin 1 outside/inside (connectors facing same direction)
QQQ= Quantity
Example: ECA-26S25DM-24-A-005 26 position socket connector to 25 position D-Sub male, 24 inches long, pin 1 facing out both ends, 5 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Part Number: ECA-DIP14DIP14-18-A-010
- Assembled length: 18" outside connectors (+/-1/4")
- Connectors: 14 position .300" DIP plug connectors (2), P/N 15-D14. Phosphor bronze contacts, UL94V-0 Material. Plugs into .300" wide IC socket or can be soldered directly to printed circuit board.
- Cable: Industry standard .050" centerline flat ribbon cable, UL2651 style VW-1, 300 Volt, 105 deg C. P/N 97-014
- Mates with .300" x .100" IC sockets
- Connector orientation: Pin 1 outside
- Color: Connectors-Black, Cable-Gray
- Gold flash over nickel plating at contact point
- Fully tested
- Assembled to order
|
|
|
|
|
|
|